| I will use a push/pull tube from a boat to control the rudders and trim wing like shown in the pictures. Thanks Eric Szatkowski for the detailed design! |
 |
| I will use female rod end bearings instead of welding a nut to the 1/4 tube. Wicks aircraft supply has 5/16-24 rod ends for $5.75 which eliminates the need to weld. They are part number MW-5. They also carry the A930 series of push/pull rods for controls. These come in all lengths and are teflon lined for about $35. However a boat push/pull cable is what many use. |
 |
 |